How to Make A DIY Vape Juice
October 05, 2021
If you like to vape, but can’t seem to find a vape juice that you like, then you might have thought you’re out of options. But this is not the case. You can make your own DIY vape juice. There are DIY vape juice kits and DIY vape juice supplies available online to help you do this.
In this guide, we’ll take you through the process of making vape juice, including some of the DIY vape juice flavors that are available and the ingredients you’ll need. We’ll also include a selection of vape juices you can buy if you decide making it isn’t for you.
How to Make A DIY Vape Juice
- Is It Possible to Make Your Own Vape Juice?
- What Flavors Can I Choose From?
- Ingredients for your DIY Vape Juice
- How to Make DIY Vape Juice: Step-by-Step
- Other options
- Conclusion
Is It Possible to Make Your Own Vape Juice?
It most definitely is possible to make your own DIY vape juice. It’s cost-effective compared to buying e-liquids online, it’s a personal process because you decide the ingredients, and you can create combinations that you won’t find online or in stores.
It’s not that complicated to do either. There are calculators online to help you figure out how much of each ingredient you should use and plenty of recipes you can follow if you feel you need some practice first.
Once you’ve read through this article, you should feel confident enough to at least attempt to make your own DIY vape juice. If you don’t, you can still choose from DIY vape juice kits if you need a helping hand. You can also create DIY THC vape juice if it interests you, but it’s a little more complicated.
What Flavors Can I Choose From?
When you’re picking DIY vape juice flavors, you’ll be overwhelmed with how many there are. If you tried to narrow them down, you’d waste a lot of time. That’s why we’ve given you a shortlist of everyday flavors that you can begin experimenting with.
Candy
One of the best DIY vape juice flavors is candy. It counters the often harsh taste of cannabis by making it taste nice. You can pick from options like blue razz, cotton candy, and caramel. These flavors are also good for reliving childhood memories of sweet snacks.
Drinks
If your favorite food doesn’t appeal to you as a vape juice flavor, you can try one of your favorite drinks. There are plenty of options available for you, like strawberry milk, coffee, and whiskey. If you want to make vaping taste like a drink, these flavors are your best options.
Fruit
If you want healthier flavors to infuse your vaping experience, you can also pick from a range of fruity flavors. You can have sweet fruits like strawberries or tangy fruits like orange and lime. It depends on what you prefer because some of these flavors can overlap with candy.
Desserts
If sweet treats are a little too sugary or rich to add to your vape juice mixture, then you can try some desserts instead. Some more savory dessert flavors include pies and custards, but there are many to choose from. You can also get classic flavors like ice cream and donuts.
Ingredients for your DIY Vape Juice
Any DIY vape juice kits that you buy will have four core ingredients, and you can get them anytime you’re looking for DIY vape juice supplies. Each ingredient serves an important function, so it’s worth getting familiar with each one. Once you know what they do, you’ll be confident using them.
Propylene Glycol (PG)
Propylene Glycol is a significant ingredient in DIY vape juice because it’s the ingredient that carries the flavor you’ve chosen. It acts as a carrier because you can’t taste it or smell it. You can only know it’s there when it’s in the container you buy it in.
Vegetable Glycerin (VG)
Another essential ingredient you’ll find in DIY vape juice supplies is Vegetable Glycerin. VG creates the clouds that are associated with the vaping experience. Without adding this, you won’t get clouds, and that would be a big disappointment. It also has a slightly sweet flavor, which is worth keeping in mind.
Diluted Nicotine
Nicotine is a crucial ingredient in vaping, but you must choose the correct strength. You can have high-strength nicotine, but you need to be careful with it. The VG or PG will serve as a base, and a good base fluid amount to start with is 100mg/mL.
Flavor Concentrates
After adding all of the previous ingredients, you’ll want to put your chosen flavors into the mixture. These are where it gets fun because you can customize the flavors using a range of combinations, some of which we looked at above. But it’s worth remembering that PG bases are used to dilute flavors.
How to Make DIY Vape Juice: Step-by-Step
The process for making DIY vape juice or DIY THC vape juice is spread across five steps, and each one needs to be followed carefully, even if it doesn’t seem that important. We’ll outline them all below so that you can understand quickly and without confusion.
1. Choosing Your Recipe And Ratio
Before you start mixing any ingredients, you need to know what recipe you’re following and what you want your ratio of ingredients to be. Whatever you do, your flavors should make up no more than 20% of the contents. That ensures the taste is just right. VG makes thicker and cloudier juices, whereas PG is the opposite.
2. Mix The Ingredients
Measure everything out, and ensure you have the correct proportions. You can use online calculators to help you do this. Once done, you can mix all of the ingredients in the right amounts. After that, simply add hot water for 30 seconds and shake the container.
3. Labeling Your Container
You should label your container once you’ve produced your vape juice so that you know what the recipe and ingredients are and so that you can keep track of it. It should also have the strength, version number, and creation date on it.
4. Steeping Your Juice
Steeping is a crucial part of the process after you’ve made your new vape juice. It simply means allowing the juice to sit for some time, so the ingredients settle. You should uncap the bottle too and leave it to steep for around a week. Stronger flavors will need longer.
5. Storing Your Juice
Once everything is complete, you’ll need to store your vape juice so that it doesn’t spoil. That means in a place that’s dry and cool. An ideal location is a cellar or cupboard, but make sure nothing can tamper with it, like pets or children.
Other Vape Juice Options
If you look through DIY vape juice supplies after reading this article and decide that the process isn’t for you, there are some ready-made vape juices worth buying. We’ve selected four of these for you, so you don’t have to bother searching.
VCT - Ripe Vapes
For $13.99, you can pick up this 60ml bottle of vape juice with 6mg of nicotine, or for $24.99, you can buy a 120ml version. You can choose a different nicotine strength between 0-12mg, but the price will vary. It’s a combination of tobacco and vanilla custard flavors.
Lava Flow - Naked 100 E-Liquid
An eye-catching vape juice to consider is this one from Lava Flow. You can choose from 0mg, 3mg, or 12mg of nicotine, and it comes in a 60ml bottle for $16.99. The flavor is a mixture of tropical fruits, including pineapple and coconut.
Heisenberg - Innevape E-Liquid
The Innevape E-Liquid from Heisenberg is a good deal if you haven’t liked any of the others so far. It comes in a slightly larger 75ml bottle, and you can get it with 6mg of nicotine for just $13.32. When you taste it, you’ll notice flavors resembling blue raspberries.
Blue Razz - Air Factory E-Liquid
This is an intriguingly named vape juice that’s sure to get you enjoying the vaping experience. You can get it with 6mg of nicotine in a generously sized 100ml bottle for just $19.99. It has a similar taste to the Innevape E-Liquid we just reviewed but adds some hints of candy on top.
Conclusion
You should now be aware of all the relevant information regarding DIY vape juice and that DIY THC vape juice is more complex. You’ll also have a selection of vape juices you can buy if you choose not to make your own.
If you choose to buy high-quality vaping products and accessories, you can take one extra step.