SMOK Morph 219 Starter Kit - Smok

Well, seems like Smok still has a couple of tricks up their sleeves. This brand does not stop creating products and we are absolutely not mad about it. Now they are introducing us to the Morph 219W Kit, which is blowing our minds. This kit is going to have it all so that you do not have to turn to anything else for a little help. This kit will have a mod and tank ready for you to connect and use. Once put together, they will have a compact size so that they fit in your pocket and hand comfortably. The mod will have a VW wattage output range of 1W to 219W, a TC wattage output range of 10W to 219W, and temperature control range of 200˚F to 600˚F. When it comes to the resistance, the VW mode will have a range of 1.0ohm to 2.5ohm, and the TC mod will have a range of 0.05ohm to 2ohm. The voltage intake range is 6.4V to 8.4, and the voltage output range is 0.5V to 8.2V. To power any of this, the mod does require two high-amp 18650 batteries. The tank capacity will be 6ml, and it will work with two different coils. The 0.25ohm TF BF-Mesh coil will be pre-installed, but the 0.35ohm TF BC-Mesh coil comes in the packaging. This will give you the opportunity to try them both out and see which one you prefer. Do not hurt yourself searching so hard! Just get your hands on this kit and you will be good to go. 

Product Features:

Morph 219W Box Mod Features:  

• Dimensions: 44.8mm x 30.2mm x 84.5mm
• Batteries Required: Two High-Amp 18650 Batteries (Sold Separately)
• VW Wattage Output Range: 1W - 219W
• TC Wattage Output Range: 10W - 219W
• Standby Current: 400uA
• Construction: Zinc Alloy
• Voltage Input Range: 6.4V - 8.4V
• Voltage Output Range: 0.5 - 8.2V
• Firing Time: 0.001S
• Charging Current: 1.8A
• Charging Voltage: 5V
• VW Resistance Range: 0.1ohm - 2.5ohm
• TC Resistance Range: 0.05ohm - 2ohm
• Temperature Control Range: 200˚F - 600˚F
• 1.9” Color Touch Screen
• Passcode Setting Feature
• Bottom-Loaded Hinged Battery Door
• 10 Seconds Cut-Off
• Short Circuit Protection
• Over Heating Protection
• Over Discharge Protection
• Micro USB Port
• Firmware Upgradeable

TF Tank Features: 

• TF Tank Dimensions: 30mm x 56mm
• Tank Capacity: 6ml
• Rotary Top Fill Design
• Dual Bottom Adjustable Airflow Control
• Construction: Stainless Steel 
• Bulb Pyrex Glass Tube
• Flavorful Mesh Coil System
• TF BF-Mesh Coil Resistance: 0.25ohm (Rated For 30W - 80W)
• TF BC-Mesh Coil Resistance: 0.35ohm (Rated For 30W - 70W)
• Antibacterial Medical Cotton
• Wide Bore Resin Drip Tip
• Thread: 510

Package Includes:

• 1 x Morph 219W TC Box Mod By Smok
• 1 x TF Sub Ohm Tank
• 1 x Pre-installed 0.25ohm TF BF-Mesh Coil
• 1 x 0.35ohm TF BC-Mesh Coil
• 1 x Bulb Glass Protective Silicone
• 1 x TF Glass Tube Replacement
• 1 x Micro USB Charging Cord
• 1 x Replacement Parts And Glass
• 1 x Instructional Manual

***All specifications and descriptions are based on information provided by the manufacturer. Information provided is not representative of testing and or verification by Breazy.com and should be used at consumers discretion. 

Disclaimer: Use At Your Own Risk! Advanced products are for experienced users with extensive knowledge of how electronic devices work along with access to the appropriate safety tools. Please ensure proper precautions are taken when using these devices. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Never leave charging batteries unattended. Breazy Inc will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries.