Product Description
iStick 100W Pico S Kit - Eleaf
We understand that you have been remaining loyal to the tank and mod you are currently using, but perhaps it is time to switch it up a bit. Eleaf is a popular brand that only brings great products into the vaping community. This is why you should certainly think about getting your hands on the iStick 100W Pico S Kit. It is a powerful piece of hardware that will make your vape trips seems more epic than you are used to. The box mod will have a wattage output range of 1W to 100W, a voltage output range of 0.5V to 9V, and a temperature control range of 200˚F to 600˚F. There will also be a max voltage current of 50A and a minimum atomizer resistance of 0.05ohm. This mod does require a single high-amp 18650 battery that is going to power it up and allow it to run smoothly. However, you can also use a high-amp 21700 battery if you choose to. The ELLO VATE sub ohm tank that comes with this kit will have a stainless steel construction with a 6.5ml tank capacity. There is going to be a lot of puffing going up in here once you switch it up to this kit that is going to be impressive.
Product Features:
iStick 100W Pico S Box Mod Features:
- Dimensions: 75mm x 52.5mm x 28.5mm
- Batteries Required: Single High-Amp 18650 Batteries (Sold Separately)
- High-Amp 21700 Batteries (Optional)
- Wattage Output Range: 1W - 100W
- Voltage Output Range: 0.5V - 9V
- Max Voltage Current: 50A
- Min Atomizer Resistance: 0.05ohm
- Temperature Control Range: 200˚F - 600˚F
- Supports Ni200, Titanium, and 316 Stainless Steel
- Ergonomic Rounded Contour
- Preheat Functionality
- TCR Adjustments
- Three Memory TCR Mode
- OLED Display
- Multi-Color LED Light
- Oversized Firing Design
- Top Adjustment Buttons
- Top-Loaded Threaded Battery Cap
- Dual Circuit Protection
- Reverse Polarity Protection
- Micro USB Port
- 2A Max Charge
- 510 Connection
ELLO VATE Sub Ohm Tank Features:
- Diameter: 28mm
- Tank Capacity: 6.5ml
- Construction: Superior Stainless Steel
- Pyrex Convex Glass Reinforcement
- Work With HW Series Coils By Eleaf
- HW-N Net Coil Resistance: 0.2ohm (Best With 40W - 80W)
- HW-M Multi-Hole Coil Resistance: 0.15ohm (Best With 50W - 100W)
- Dual Base Adjustable Airflow Control
- Retractable Top-Fill Design
- 810 Resin Widebore Drip TIp
- Detachable Structure
- Thread: 510
Package Include:
- 1 x iStick 100W Pico S Box Mod By Eleaf
- 1 x ELLO VATE Sub Ohm Tank By Eleaf
- 1 x 0.15ohm HW-M Multihole Coil
- 1 x 0.2ohm HW-N Net Coil
- 1 x Battery Sleeve
- 1 x Micro USB Cord
- 1 x Set Of Spare Parts
- 1 x User Manual
***All specifications and descriptions are based on information provided by the manufacturer. Information provided is not representative of testing and or verification by Breazy.com and should be used at consumers discretion.
Disclaimer: Use At Your Own Risk! Advanced products are for experienced users with extensive knowledge of how electronic devices work along with access to the appropriate safety tools. Please ensure proper precautions are taken when using these devices. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Never leave charging batteries unattended. Breazy Inc will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries.